Hot Rolled Universal Beams and Columns
Grade and Specification
- EN 10025 S235JRG2, S275JR, S275JO, S275J2/J2+M, S355JR, S355JO, S355J2 / J2+M
- ASTM A36, ASTM A 572 GR 50
Euronorm Sections
Grade and Specification
- EN 10025 S235JRG2, S275JR, S275JO, S275J2/J2+M, S355JR, S355JO, S355J2 / J2+M
- ASTM A36, ASTM A 572 GR 50
Euronorm Shapes
- IPE – European I Beams
- IPN – European Standard Beams
- HE and HL – European Wide Flange Beams
- HD – Wide Flange Columns
- HP – Wide Flange Bearing Piles
- UAP – Channels with Parallel Flanges
- UPN – European Standard Channels
Wide Flange Imperial Beams
Grades and Specification
- ASTM A36, ASTM A 572 GR 50
Parallel Flange Channels
Grade and Specification
- EN 10025 S235JRG2, S275JR, S275JO, S275J2/J2+M, S355 JR, S355JO, S355J2/J2+M
- ASTM A36, ASTM A 572 GR 50
Lip Channels
60 x 30 x 10 x 1.6mm to 250 x 75 x 25 x 4.5mm (2.36” x 1.18” x .394” x .063” to 10” x 3” x 1” x .177”) -
Produced in Black and in Galvanised
Specification / Grades: JIS G3131, ASTM A830 & JIS G 3350
Hot Rolled Sections
Equal Angles – 20 x 20 x 3 to 250 x 250 x 35mm (0.78” x 0.78” x .118” to 10” x 10” x 1.38”)
Unequal Angles – 30 x 20 x 3mm to 200 x 125 x 18mm (1.18” x .787” x .118” to 8” x 5” x .71”)
Round Bars – up to 200mm (8”) diameter
Flat Bars – 20 x 5mm (0.78” x .196”) to any desired size
Square Bars – 8mm to 300mm (.314” to 12”)
Grade and Specification
- EN 10025 S235JRG2, S275JR, S275JO, S275J2/J2+M, S355JR, S355JO, S355J2 / J2+M
- ASTM A36, ASTM A 572 GR 50
