Bi-Metal Cladded Pipes
OD: 4” (101.6mm) to 36” (914.4mm)
Wall Thickness of Outer Pipe: 10mm (0.394”) to 35mm (1.38”)
Specification and Grades of Outer Pipe: From API 5LX45 to API 5LX70
Typical Thickness of Liner Pipe: 1.5mm to 3mm (0.059” to 0.118”) – different wall thickness available
upon request
Corrosion resistant liner Pipes in Austenitic, Super Austenitic and Nickel Alloy Grades
Metallurgical Cladded Pipes
Are produced from Roll Bonded Plates
OD: 8” (203.2mm) to 100” (2540mm)
Wall Thickness of Outer Pipe: 15mm to 60mm (0.59” to 2.36”)
In 12 meters length without any circumferential weld
Specification and Grades of Base Material: Carbon Steel, High Yield and Low Alloy Steel
Corrosion resistant Cladded Material: In Austenitic, Super Austenitic and Nickel Alloy Grades – 304,
304L, 316, 316L, 317L, 410, 254Mo, alloy 625, 825 and others
Also available weld overlay on valves, Flanges, nozzles and auxiliary components
|